For optimal configuration of the monitoring station, the instruments are supplemented by an extensive range of mechanical installation and assembly aids and useful accessories. These functional and practical tools provide the user with tailormade and well thought-out solutions for almost every application.
All mechanical system components are manufactured from corrosion resistant materials. They are easy to assemble and completely maintenance free. The modular concept and the large design variety facilitate trouble-free adaption to the specific application requirements and installation circumstances.
KI/S
This passive junction box is used for extension cabling between WTW sensors and the EcoLine and QuadroLine® series monitors.
KI/ph 170
Junction box with integrated impedance converter is designed to connect high impedance pH electrodes to WTW pH monitors over relatively long distances of up to 100 m (330 ft).
The universal extension assemblies made of PVC are used for mounting and mechanically protecting all 650, 690, 70X and 70X IQ series WTW sensors. The extension assemblies are available with two different standard lengths of armor; special armor lengths can be defined in your order. The assemblies are supplied with a stainless steel handle and a set of seals.
UA 55
Armored length without sensor 317 mm (12.48 in.).
UA 130
Armored length without sensor 1067 mm (42.01 in.).
UA-SO
Armored length without sensor: stepless selectable between 240 - 2600 mm (9.45 and 102.36 in.).
EH/U 170
Single sensor holder
EH2/U 170
Twin sensor holder
EH3/U 170
Triple sensor holder
The SensoClean swing mounting assembly consists of a 1.5 or 2.5 m (4.86 ft. or 8.11 ft.) long boom and a 4 m (13 ft.) long plastic chain for height adjustment of the sensor. It may also hold sensor extension assemblies. Particularly in turbulent flows, the freely swinging suspension produces a selfcleaning effect of the sensor, making the swing mounting especially suitable for operation in basins; e.g. in the aeration tank of a wastewater treatment plant.
| Boom length | 1.5 or 2.5 m (4.86 ft. or 8.11 ft.) |
| Material | Stainless steel 1.4301 |
| Chain material | Polyethylene |
Supplemental kit for horizontal mounting of a UV/VIS sensor (NitraVis®, CarboVis®, NiCaVis®). Suitable for basin or channel mounting in combination with swing mounting assembly EH/F 170.
| Chain material | Polyethylene |
The SensoClean pendulum mounting assembly consists of a boom with a pendulum head and an angled pendulum rod. It is fitted at the top end with a movable counterweight for fine adjustment. The sensor or the extension assembly is fastened to the pendulum rod by two pipe clamps.
| Boom | Length 620 mm (2.01 ft.), stainless steel 1.4301 |
| Pendulum rod | Length 1970 mm (6.39 ft.), stainless steel 1.4301 |
| Pendulum head, clamp | POM/Polyethylene |
The EH/W 170 mounting assembly is designed for direct fastening to a wall of a basin. It can be set for pendulous or rigid operation, and it is suitable for extension assemblies. The immersion depth is adjusted by means of a fixing ring. Includes mounting plate with appropriate wall anchors and screws.
| Boom | Length 260 mm (0.84 ft.), stainless steel 1.4301 |
| Pendulum head | POM |
| Mounting plate | Diecast aluminum |
The float with pendulum mounting assembly is available for use in flowing water or where the water level fluctuates considerably. The fixture is designed for extension assembly UA 55. A GWA weight ring is also required.
| Dimensions | 850 x 330 mm (2.76 x 1.07 ft.) (L x W) |
| Material | PVC |
Supplemental kit for horizontal mounting of a UV/VIS sensor(NitraVis®, CarboVis®, NiCaVis®). Particularly suitable for heavily fluctuating water levels in combination with the S 200 electrode float.
| Material | PVC/POM |
Mounting set for horizontal mounting of a UV/VIS sensor in the inlet of a wastewater treatment plant. Especially developed for such muddy applications
| Dimensions | Total height approx. 2.75 m (8.9 ft), boom approx. 1.50 m (4.8 ft) |
| Material | PVC-U, stainless steel 1.4571 |
Robust floor mounted stand made of stainless steel, with joint-locking fixture to accommodate a swing or pendulum mounting assembly and 2 pipe brackets for attaching a sun shield. With diecast aluminum baseplate, wall plugs and screws.
| Stand | Length 1700 mm (5.51 ft.), diameter 50 mm (1.97 in.) |
| Material | Stainless steel 1.4301 |
| Brackets | Polypropylene |
Mounting stand similar to model BE/ST 170, but shorter version for wall mounting. Wall mounting material is included instead of the baseplate.
| Stand | Length 970 mm (3.15 ft.), diameter 50 mm (1.97 in.) |
| Material | Stainless steel 1.4301 |
This stand is similar to model BE/ST 170, but with hardware for fastening of the stand to a vertical or horizontal pipe rail.
| Stand | Length 970 mm (3.15 ft.), diameter 50 mm (1.97 in.) |
| Material | Stainless steel 1.4301 |
With the BE/R 170 clamp set, a swing or pendulum mounting assembly can be fixed directly to a pipe; e.g. a handrail.
| Material | Stainless steel 1.4301/diecast Al/POM |
The swivel/pivot clamp fixture provides secure connection of a swing or pendulum mounting assembly to a horizontal pipe rail.
| Material | Stainless steel 1.4301/diecast Al/POM |
Mounting kit for sun shields, suitable for horizontal or vertical pipe rails with diameters of 25 - 60 mm (0.98 to 2.36 in.). Sun shield not included.
| Material | Stainless steel 1.4301 |
With the BE/M 170, a swing or pendulum mounting assembly can be inexpensively installed directly at the basin edge or on top of a wall. It consists of a flange clamp with a clamping lever and a bolt-on base plate.
| Material | Stainless steel 1.4301/diecast Al/POM |
Wall mounting similar model BE/M 170, but pivoting version.
| Material | Stainless steel 1.4301/diecast Al/POM |
Stainless steel double sun shield for parallel mounting of 2 series 171, 170 measuring transducers and IQ Sensor Net.
| Dimensions | 268 x 544 x 150 mm (10.55 x 21.42 x 5.91 in.) (H x W x D) |
| Material | Stainless steel, 1.4301 |
Sun shield for mounting a junction box or an IQ Sensor Net module in the open air. Mounting kit MR/SD 170 is additionally required for attachment to vertical or horizontal pipes.
| Dimensions | 142 x 230 x 87 mm (5.59 x 9.06 x 3.43 in.) (H x W x D) |
| Material | Stainless steel, 1.4301 |
Sunshield for mounting series 171, 170 and IQ Sensor Net monitors on a Vario Mounting Stand.
| Dimensions | 331 x 344 x 240 mm (13.03 x 13.54 x 9.45 in.) (H x W x D) |
| Material | ASA (Dust gray color) |
Flow-thru adapter for measurements in pipelines, consisting of a 45° PVC T-piece (d 63 DN 50) with bonded sleeve, O-ring seals and union nut. The adapter must be completed by the selection of a suitable sensor flange from the table and can then be used for measurement of pH, oxygen, temperature and conductivity with all current WTW sensors. EBST 700-DU/ND additionally features a compressed-air connection for cleaning installed sensors. Selection of sensors acc. table.
| Max. pressure | 3 bar (EBST 700-DU/N) or resp. 0.2 bar (EBST 700-DU/ND) |
| Max. temperature | 50 °C (122 °F) |
| Material | PVC/POM |
Mounting set for flow-thru measurements, consisting of a bonded sleeve for standard 45° PVC T-pieces (d 63 DN 50) or other suitable pipeline systems, one R 2” union nut and the necessary O-ring seals. Please select an adapter from the table.
| Max. pressure | 3 bar |
| Max. temperature | 50 °C (122 °F) |
| Material | PVC/POM |
| Max. pressure | 3 bar | |
| Max. temperature | 50 °C (122 °F) | |
| Material | Weld-in socket Union nut |
V4A stainless steel 1.4571 PVC/-U |
| Total length | 142 mm (5.59 in.) | |
| Outside diameter | 60 mm (2.36 in.) |
Stainless steel weld-in socket, for measurements in pipelines. Please select an adapter from the table.
Stainless steel weld-in socket, for measurements in pipelines. Please select an adapter from the table.
| Max. pressure | 10 bar | |
| Max. temperature | 60 °C (140 °F) | |
| Material | Weld-in socket Union nut |
V4A stainless steel 1.4571 V4A stainless steel 1.4571 |
| Total length | 142 mm (5.59 in.) | |
| Outside diameter | 60 mm (2.36 in.) |
In principle the flow-thru vessel D 702/N for continuous oxygen measurement can be fitted with all TriOxmatic® sensors of the 690/70X (IQ) series. However, it is primarily intended for oxygen measurements in the ppb range (TriOxmatic® 702 IQ), e.g. boiler feed water. In this application the flow-thru vessel is usually installed in the bypass of a water circulation system. Please select an adapter from the table.
Flow-thru cell for UV/VIS sensors NitraVis®/CarboVis® and NiCaVis® 700 IQ (TS). The sensor can be cleaned automatically in mounted state by means of compressed air.
Online measurements, of suspendend solids in particular, are increasingly performed directly in pipework or pressurized containers. Retractable armatures are used in order to enable assembly and removal of sensors during ongoing operation without interrupting the process. Depending on working pressure, these require suitable assembly aids in order to re-insert the sensor against the working pressure.
Apart from the two retractable armatures (for various pressure ranges) there are two different welding sockets (steel or stainless steel) and different matching adapters for mounting of the various online sensors with a shaft diameter of 40 mm (1.57 in.) available.
Compressed-air supply is provided at the plant.
You require the following components
Compressed-air supply is not provided at the plant
You require the following components
For cleaning, compressed air is blown at the sensor element (from external source) freeing it from pollutants. The compressed air from the cleaning air box or installation to the sensor is switched on or off electronically by an activated control valve or relay. The control is regulated by a timer via the IQ SENSOR NET or via a relay of the measuring system.
The cleaning air box is a air-pressure compressor supplying the cleaning air to the various sensors.
Compared with the former systems with the cleaning head valve (CHV) the cleaning air box does not require any special valve installation as well as no compressed-air supply on site.
The cleaning air box can be controlled by any WTW supplied converter via a relay (exception: MIQ/VIS).
The great advantage of this cleaning air box compared to any former systems with CHV (cleaning had valve): No compressed-air system is required on site. The cleaning air box is delivered in two models 115 VAC (480 017) and 230 VAC (480 019).
Thanks to the installation of the membrane compressor and the pre-switched filters, the cleaning air box provided oil and dust-free compressed-air, which guarantees keeping the sensor clean.
